a.Fiberglass cloth is made of high strength E glass fiberglass yarn, It is divided into plain weave, twill weave or stain weave.
b.Fiberglass cloth is composite fabric composed of glass strands of different sizes. After the user applies this material to a surface, he saturates the cloth with polyester, epoxy and vinyl and is widely used in mica tape,fiberglass tape, aircraft industry, ship industry, chemical industry, military industry and sports goods, etc.
c.the user saturates fiberglass cloth with polyester, epoxy and vinyl and is widely used in mica tape,fiberglass tape, aircraft industry, ship industry, chemical industry, military industry and sports goods, etc.
What is the difference between E-glass and C-glass?
E-glass fiber cloth, also known as E-glass, refers to glass fiber with low alkali metal oxide content. The content of alkali metal oxides in the aluminum-glass composition shall not exceed 0.5%. When selecting glass fiber raw yarn, use textile sizing agent (paraffin emulsion), the content of which is not more than 2%. E-glass of R2O content is less than 0.8%, aluminum - borosilicate component. Its chemical stability, electrical insulation and strength are very good. Mainly used as electrical insulation materials, electrical mica products, tire cord, linoleum and glass fiber reinforced materials.
C-glass of R2O in alkali fiber is 11.9% ~ 12.4%, which is a kind of alkali-calcium silicate component. Due to its high alkali content, it cannot be used as electrical insulation material, but its chemical stability and strength are still good. Generally used for latex fabric, woven base cloth, acid filter cloth, window screen materials, etc., can also be used for FRP materials whose electrical properties and strength requirements are not very strict.
What is characteristic of fiberglass cloth?
1.Fiberglass cloth has good film sticking property, complete and fast resin penetration, high production efficiency and high mechanical strength.
2.Consitent thickness and excellent surface treatment.
3.Anti-corrosion and electric insulation
4.Warp and weft yarn are parallel arrangement and flat,even tension
5.Excellent durability, consistent with the life cycle of electronic products
4.Machinery industry: aircraft structure, fan blades, firearms parts, artificial bones.
5.Sports goods: Surfboard,fishing rod, golf club , Tennis racket, bow and arrow, pole, bowling, swimming pool, snowboard.
What are the advantages and disadvantages of fiberglass reinforced plastic?
Fiberglass reinforced plastic is on the basis of original pure plastic, adding glass fiber and other additives, so as to improve the scope of use of materials.Generally speaking, most of the glass fiber reinforced materials are used in the structural parts of the product, which is a kind of structural engineering materials
Advantages:
1.After fiberglass reinforcement, fiber glass is a high-temperature resistant material. Therefore, the heat resistance temperature of reinforced plastics is much higher than that before without glass fiber, especially nylon plastics;
2.After fiber glass reinforcement, because of the addition of fiber glass, the mutual movement between the polymer chains of plastic is limited, so the shrinkage rate of reinforced plastic decreases a lot, and the rigidity is greatly improved;
3.Fiber glass reinforced, reinforced plastic will not stress cracking, at the same time, the impact resistance of plastic improved a lot;
4.After fiber glass is reinforced, glass fiber is a high-strength material, which greatly improves the strength of plastics, such as tensile strength, compressive strength and bending strength.
Look Forward To Working With You
Over the years, with our rich experience, good reputation and considerate service, the quality of our products has been deeply satisfied by users.
